axial rotation

英 [ˈæksiəl rəʊˈteɪʃn]

美 [ˈæksiəl roʊˈteɪʃn]

网络  绕轴自转; 自转; 轴向转动; 轴向旋转; 绕轴旋转

英英释义

noun

• rotary motion of an object around its own axis
  1. wheels in axial rotation
  Synonym:axial motionroll

双语例句

• [ Conclusion] ( 1) STDSP is superior to TCS in the axial loading and rotation stability and. bone construction strength retention.
  [结论]（1）静态三维钉板系统（STDSP）的轴向抗压与抗扭能力以及内固定拆除后骨强度的保留能力，均优于3根松质骨螺钉；
• Conclusion: Unilateral pedicle screws fixation cannot provide sufficient stability in lateral bending and axial rotation, pedicle screws endure more stress.
  结论：单侧椎弓根螺钉固定不能很好地控制侧屈和旋转载荷，椎弓根螺钉承受较大的应力；
• The fact joints of L3-L4 segment increase in flexion and extension 200 positions and decrease in axial rotation.
  L3&L4节段小关节面在前屈和后伸20°时受力增大，轴向旋转时受力减小。
• Conclussion: Spine without instability in the anterior and middle columes fixed with TLS increases significantly in flexion, extension, lateral bending and axial rotation stability, especially in rotation.
  结论：在无明显前中柱不稳时，TLS固定后脊柱的前屈、后伸、侧弯和旋转的稳定性明显增加，尤其旋转增加较多；
• Using magnetic fluid dynamics and thermodynamics theory, a study on the results of axial bearing pressure ability of rotation axis magnetic fluid static seals was introduced.
  介绍了利用磁流体动力学、热力学理论，研究旋转轴磁流体静密封轴向承压能力的结果。
• Motions of flexion/ extension, lateral bending and axial rotation were produced by six pure moments with maximum of 10.0N · m and measured with stereophotogrammetry.
  对标本施加最大为10.0N.m的力偶矩，使之产生前屈、后伸、左右侧屈和左右轴向旋转运动，并由双平面立体测量的计算机图像分析系统得到节段运动范围。
• There was slight axial rotation of the tibia relative to the femur.
  相对于股骨，胫骨出现轻微轴向转动。
• The measured variables were axial rotation, varus angulation, lateral translation, and anterior translation.
  测量变量为轴向旋转、内翻角、外向平移和前向平移。
• Under the precondition of incompressible flow, fluid spiral motion in SK static mixer tube was resolved into axial beeline motion and circumferential rotation motion.
  在流体不可压缩的假设前提下，将流体在SK型静态混合器中的螺旋形运动分解成轴向直线运动和环向旋转运动。
• When swinging drive mechanical operation, such as the rotation speed of the force to make efforts axial shaft before and backward rotation and enable higher plane.
  当摇摆传动机械运作时，等速度的旋转入力轴使出力轴向前和向后旋转，并使平面升高。